RIG FOR THE FUTURE - MOSS CS ECO-X™

Moss Maritime has made a large effort to develop the “Rig for the Future” based on our proven CS-series. The aim has been to offer a design with limited to no emissions in order for our clients to meet their targets and ambitions of decarbonized operations. This is achieved through a hybrid power system, exhaust cleaning, the introduction of clean fuels and with a plug-in option.

The CS ECO-X™ concept takes the CS ECO™ design further into the future, implementing the latest state-of-the-art technologies for digitalization and automatization to increase efficiency of operations and facilitate personnel on-board (POB) optimization. Maintenance is intended to be condition based rather than calendar based using a digital platform for assembling performance data of critical equipment. Further, the CS ECO-X™ concept can be optimized for drilling wells for offshore CO2 storage.

Building on a proven and safe design, the CS ECO-X™ rig design is a quantum leap in the direction of more sustainable drilling operations. Alongside the decarbonization effort in a time of energy transition, the concept will save cost through reduced OPEX together with unmatched uptime and operating efficiency.

CS60Eco

CS-SERIES

The Moss CS-series of semi-submersible catamaran platforms has established itself over the last 30 years as one of the most successful and widely-used platform designs. The success is based on their design to meet a large variety of requirements. The structural layout of the lower hull allows alternative configurations of the deck arrangements and installations. This flexibility makes the CS-series ideal for applications other than drilling, such as well service, or as special purpose platforms such as the SDX-1 radar platform used by U.S Department of Defense.

Ranging in size from only 25,000 tons displacement up to 75,000 tons, the CS-series platforms are rugged and long-lived with excellent motion characteristics. Field proven in the harshest of environments, they guarantee a long life with outstanding performance.

MOSS CS ECO™

The MOSS ECO™ comprises the latest available technologies with regard to energy efficiency and discharge/ emissions:

  • Moss EcoDrive™
  • Moss EcoGreen™
  • Moss EcoLNG™

MOSS CS50

The CS50 is our most popular semi. It is valued for its low weight compared to the high amount of deck load, which is ideal for platforms operating in ultra-deep water and harsh environments. The platform can be delivered in both dynamic positioning (DP) and regular anchor moored state. It accommodates dual activity and high capacity drilling systems. A special “non-harsh” version of the CS50 has also been developed for optimal performance for milder environments while still maintaining the proven characteristics and features of the CS50.

MOSS CS30 & CS40

Developed with lighter equipment, the smaller CS30 and CS40 perform in shallow to medium-deep water either anchor-moored or as DP platforms

MOSS CS60 & CS70

The CS60 and CS70 are the high end platforms used for operations in areas which are difficult to reach, and the supplies and equipment needs to be onboard for a long period of time.

RIG FOR THE FUTURE - MOSS CS ECO-X™

Moss Maritime has made a large effort to develop the “Rig for the Future” based on our proven CS-series. The aim has been to offer a design with limited to no emissions in order for our clients to meet their targets and ambitions of decarbonized operations. This is achieved through a hybrid power system, exhaust cleaning, the introduction of clean fuels and with a plug-in option.

The CS ECO-X™ concept takes the CS ECO™ design further into the future, implementing the latest state-of-the-art technologies for digitalization and automatization to increase efficiency of operations and facilitate personnel on-board (POB) optimization. Maintenance is intended to be condition based rather than calendar based using a digital platform for assembling performance data of critical equipment. Further, the CS ECO-X™ concept can be optimized for drilling wells for offshore CO2 storage.

Building on a proven and safe design, the CS ECO-X™ rig design is a quantum leap in the direction of more sustainable drilling operations. Alongside the decarbonization effort in a time of energy transition, the concept will save cost through reduced OPEX together with unmatched uptime and operating efficiency.

CS60Eco

CS-SERIES

The Moss CS-series of semi-submersible catamaran platforms has established itself over the last 30 years as one of the most successful and widely-used platform designs. The success is based on their design to meet a large variety of requirements. The structural layout of the lower hull allows alternative configurations of the deck arrangements and installations. This flexibility makes the CS-series ideal for applications other than drilling, such as well service, or as special purpose platforms such as the SDX-1 radar platform used by U.S Department of Defense.

Ranging in size from only 25,000 tons displacement up to 75,000 tons, the CS-series platforms are rugged and long-lived with excellent motion characteristics. Field proven in the harshest of environments, they guarantee a long life with outstanding performance.

MOSS CS ECO™

The MOSS ECO™ comprises the latest available technologies with regard to energy efficiency and discharge/ emissions:

  • Moss EcoDrive™
  • Moss EcoGreen™
  • Moss EcoLNG™

MOSS CS50

The CS50 is our most popular semi. It is valued for its low weight compared to the high amount of deck load, which is ideal for platforms operating in ultra-deep water and harsh environments. The platform can be delivered in both dynamic positioning (DP) and regular anchor moored state. It accommodates dual activity and high capacity drilling systems. A special “non-harsh” version of the CS50 has also been developed for optimal performance for milder environments while still maintaining the proven characteristics and features of the CS50.

MOSS CS30 & CS40

Developed with lighter equipment, the smaller CS30 and CS40 perform in shallow to medium-deep water either anchor-moored or as DP platforms

MOSS CS60 & CS70

The CS60 and CS70 are the high end platforms used for operations in areas which are difficult to reach, and the supplies and equipment needs to be onboard for a long period of time.